Description
This OTDR tests adopt 4.3-inch capacitive touch screen. The OTDR tester integrates 12 functions, such as auto OTDR, expert OTDR, event map, OPM (optical power meter), VFL(visual fault locator), RJ45 cable tracker, and “computer level” file management to meet various test requirements in different occasions. OTDR has a maximum dynamic range of 26dB, 8G memory, and can store more than 200,000 curves; The OTDR is equipped with 4000mAh high-density polymer lithium battery, intelligent power saving management, measuring time of more than 8 hours, and supporting power supply and charging of the power bank.
The fiber OTDR tester is used to measure the length, loss, connection quality and other parameters of optical fiber. As a professional OTDR fiber tester provider, this OTDR cable tester are widely used in FTTX, fiber telecom network engineering construction, maintenance and emergency repair test, and production measurement of optical fiber and cable.
Standard configuration:
| NO. |
Name |
Quantity |
Remarks |
| 1 |
Host |
1 |
Battery included |
| 2 |
Adapter |
1 |
|
| 3 |
Data Line |
1 |
|
| 4 |
8G TF card（Analysis software/User’s Manual） |
1 |
built-in OTDR |
| 5 |
User’s Manual |
1 |
|
| 6 |
SC/UPC |
|
|
| 7 |
Qualification Certificate/ Service Guarantee Card |
1 |
|
| 8 |
Calibration Certificate |
1 |
|
| 9 |
Clean Cotton Slices |
1 |
|
| 10 |
Instrument Backpack |
1 |
|
Note：The OTDR connector is FC/UPC as standard and FC/APC is optional.
Specification
OTDR tests' functions:
Auto OTDR fiber test, expert OTDR, event map, OPM, LS, VFL, RJ45 cable tracker(Including line finder), RJ45 cable sequence, RJ45 cable length, end face detection(Optional), flashlight, optical loss test
Fiber OTDR tester's technical specifications:
| OTDR |
| Model |
BD400D |
| Wavelength |
1310/1550±20nm |
| Fiber Type |
G.652 |
| Dynamic Range |
26/24dB |
| Event Blind Zone |
2.5m |
| ATT Blind Zone |
8m |
| Test Range |
500m/1km/2km/4km/8km/16km/32km/64km/100km |
| Pulse Width |
3ns~20us |
| Ranging accuracy |
±（1m+ Sampling interval +0.005％×Test distance） |
| Loss accuracy |
±0.05dB/dB |
| Sampling Points |
16k~128k |
| Sampling resolution |
0.05m~8m |
| Reflection accuracy |
±3dB |
| Data Storage |
8G, ≥200,000 curves |
| Laser Safety Level |
Class 2级 |
| File format |
SOR Standard file format |
| Connector |
FC/UPC（Interchangeable SC/ST） |
| OPM |
| Wave Range |
800nm~1700nm |
| Connector |
Universal Joint FC/SC/ST |
| Test Range |
-70dBm～+6dBm(-50dBm～+26dBm optional) |
| Uncertainty |
±5% |
| Frequency Identification |
CW/270/330/1k/2kHz |
| Calibration wavelength |
850/980/1300/1310/1490/1550/1625/1650nm |
| Fiber OTDR tester's LS |
| LD Type |
FP-LD |
| Wavelength |
Consistent with OTDR output wavelength |
| Output Power |
（-2dBm±～-10dBm）±2dB (Adjustable output power) |
| Modulation Frequency |
270/330/1k/2kHz |
| Stability |
CW, ±0.5dB/15min（Test after 15 minutes of preheating） |
| Connector |
FC/UPC（Interchangeable SC/ST） |
| OTDR tests' VFL |
| Wavelength |
650nm±20nm |
| Output Power |
≥10mW |
| Mode |
CW/1Hz/2Hz |
| Connector |
FC/UPC（Interchangeable SC/ST） |
|
OTDR cable tester's RJ45 Cable length/Cable sequence/Cable Tracking
|
| Test Range |
300m |
|
Others
|
| Display |
4.3 inch Color LCD, Multi touch capacitive touch screen |
| Data Interface |
Type-C |
| External storage |
TF card |
| Power Supply |
Polymer Li-Battery: 3.7V, 4000mAh
Adapter: 5VDC, 2A
|
| Battery Life |
Standby＞20h; Measuring time＞12h |
| Working Temperature |
-10℃～50℃ |
| Storage Temperature |
-20℃～70℃ |
| Relative Humidity |
0～95％ Non Condensing |
| Weight |
≤500g |
| Size |
173mm×109mm×45mm |
