Description
16E1-10/100/1000M Gigabit Ethernet interface converter used back multiplexing technology, transfer 10/100/1000M Ethernet data by using multi E1 channels. Realize convert between 1 to 16E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. also realize 10/100/1000M over 1000M fiber transmission and transmit 20/40/80/120km.this product has 3 electrical Ethernet port 10/100/1000M and 2 fiber SFP slot (comply with 1.25G SFP module),1 console port, SNMP/GUI support.
Features:
Realizing the transparent transmission of Ethernet data via 1 to 16 E1 lines
Ethernet support the working mode : full duplex and half-duplex adapt
Support 10240 bytes MTU packet.
E1 interface in compliance with ITU-T G.703, G.704 and G.823
E1 Support 75Ω/unbalance impedance or 120Ω/balance for order
E1’s Support local and remote loops
Support 3 electrical Ethernet port 10/100/1000M (total bandwidth is 1000M) and Vlan division; support 2 fiber port SFP slot(for 1.25G fiber module) and1 console port
Support VLAN overlong data package transmission and can work with switch which support IEEE802.1Q
Support full indicators: Power status indicator, Status of activity (E1’s),indicator LAN (Ethernet ports),optical connection indicator etc.
Support AC+DC power for redundant
Console port has below function:
Has OAM frame management ; local device could read and manage remote device work status;
Can do VLAN division based on PORT for local device and it wouldn’t effect the 802.1 Q VLAN division for remote device,then local and remote can do same VLAN division;
Ethernet port can do priority set;
Specification
E1 Interface
Line Rate: 2.048Mbps±50ppm
Line Code : HDB3
Interface Standard: ITU-T G.703
E1 Impedance: 75Ω(unbalance) or 120Ω(balance)
Connections : 75ohm DB37 adaptor or 120-ohm twisted-pair (RJ45)
Jitter tolerance : finer than G.742 and G.823
10/100/1000M ase-T Interface
Rate: 10/100/1000M, full/duplex auto-negotiation
Protocol: Support IEEE 802.3,IEEE 802.1Q (VLAN)
Physical interface: RJ45, support AUTO-MDIX
SFP Optical Interface
Ports: 850nm,1310nm,1550nm
Rate: 1.25G
Distance: up to 100KM
Protocol: Support IEEE 802.3,IEEE 802.1Q (VLAN)
Connector: SC/LC option
Non-return-to-zero (NRZ)
SFF-8472 Multi-source Agreement (MSA).
Power supply
working voltage range wide, good
anti-disturb and Isolation, work stable
option I – DC-48V,range DC-36V~DC-72C
option II – AC220V,range AC110V~AC240V
Power Consumption: <=10 Watts
Environment condition
Operating temperature: 0C~+50 C
Storage temperature: -20 C~+70 C
Relative temperature:95% (uncondensed)
Application
Order information
| Product Model | Descriptions |
|---|---|
| BD-16E1-GE-OP/AC | 16E1channel,E1:75ohm or 120ohm,3 electrical Ethernet port 10/100/1000M 2 fiber port SFP slot(for 1.25G fiber module) and1 console port, Power AC220V,1U 19"rack |
| BD-16E1-GE-OP/DC | 16E1channel,E1:75ohm or 120ohm,3 electrical Ethernet port 10/100/1000M 2 fiber port SFP slot(for 1.25G fiber module) and1 console port, Power DC48V,1U 19"rack |
| BD-16E1-GE-OP/AC+DC | 16E1channel,E1:75ohm or 120ohm,3 electrical Ethernet port 10/100/1000M 2 fiber port SFP slot(for 1.25G fiber module) and1 console port, Power AC220V+ DC48V,1U 19"rack |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.