SFP Module fiber Optical Transceiver 1.25G

Roll over image to zoom in Click on image to zoom

SFP Module fiber Optical Transceiver 1.25G

Name: SFP Module fiber Optical Transceiver 1.25G
Brand: BAUDCOM
SKU: BDTRP493L1SN-20
Price: 5.0 USD
Availability: InStock

BAUDCOM

Wavelength: transmitter 1490nm/receiver 1310nm

Distance: 20km

Variant

Price:

$9.70

Quantity:

Share this product

The 1.25G SFP optical module is Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). They simultaneously comply with Gigabit Ethernet as specified in IEEE Std 802.31 and 1x and 2x Fiber Channel as defined in FC-PI 13.03.
The 1000BASE-LX/LH (long wavelength/long haul) SFP module interfaces fully comply with the IEEE 802.3z 1000BASE-LX standard.Their higher optical quality allows them to reach 6.2 miles (10 km) to 62.1 miles(100km) over single-mode fiber (SMF) .

Features:

● Up to 1.25Gb/s bi-directional data links
● Hot-pluggable SFP footprint
● 1310/1550nm FP/DFB, SM Fiber
● Duplex LC connector
● Very low jitter
● Up to 100km on 9/125μm SMF
● Metal enclosure, for lower EMI
● Single 3.3V power supply
● Low power dissipation

Specification

Absolute Maximum Ratings:

Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Maximum Supply Voltage	Vcc	0.5		4.5	V
Storage Temperature	TS	-40		100	℃
Case Operating Temperature	TOP	-40		85	℃
Relative Humidity	RH	0		85	%	1

Electrical Characteristics (TOP = -40 to 85 ℃, VCC = 3.00 to 3.60 Volts)

Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Supply Voltage	Vcc	3.00		3.60	V
Supply Current	Icc		200	300	mA
Transmitter
Input differential impedance	Rin		100		Ω	2
Single ended data input swing	Vin,pp	250		1200	mV
Transmit Disable Voltage	VD	Vcc – 1.3		Vcc	V
Transmit Enable Voltage	VEN	Vee		Vee+ 0.8	V	3
Transmit Disable Assert Time				10	us
Receiver
Single ended data output swing	Vout,pp	300	400	800	mV	4
Data output rise time	tr		100	175	ps	5
Data output fall time	tf		100	175	ps	5
LOS Fault	VLOS fault	Vcc – 0.5		VccHOST	V	6
LOS Normal	VLOS norm	Vee		Vee+0.5	V	6
Power Supply Rejection	PSR	100			mVpp	7
Deterministic Jitter Contribution	RX Δ DJ			51.7	ps	8
Total Jitter Contribution	RX Δ TJ			122.4	ps

Notes:

1. Non condensing.

2. AC coupled.

3. Or open circuit.

4. Into 100 ohm differential termination.

5. 20 – 80 %

6. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.

7. All transceiver specifications are compliant with a power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to specified value applied through the power supply filtering network shown on page 23 of the Small Form-factor Pluggable (SFP) Transceiver MultiSource Agreement (MSA), September 14, 2000.

8. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and DDJ.

Optical Characteristics (TOP = 0 to 70℃, VCC = 3.00 to 3.60 Volts)

Parameter	Symbol	Min	Typ	Max	Unit	Ref.
Transmitter
Output Opt. Power	POUT	-9		-3	dBm	1
Optical Wavelength	λ	1270	1310	1360	nm	2
Spectral Width	σ			3	nm	2
Optical Modulation Amplitude	OMA	174			μW	2,3
Optical Rise/Fall Time	tr/ tf		100	160	ps	4
RIN				-120	dB/Hz
Deterministic Jitter Contribution	TX Δ DJ		20	56.5	ps	5
Total Jitter Contribution	TX Δ TJ		70	119	ps
Optical Extinction Ratio	ER	9			dB
Receiver
Average Rx Sensitivity @ 2.125	RSENS1			-21	dBm	6, 7
Gb/s (2X Fiber Channel)
Average Rx Sensitivity @ 1.25 Gb/s	RSENS2			-22	dBm	6, 7
(Gigabit Ethernet)
Average Rx Sensitivity @ 1.06 Gb/s	RSENS1			-22	dBm	6, 7
(1X Fiber Channel)
Stressed RX sens. =1.25 Gb/s			-18	-14.5	dBm
Average Received Power	RxMAX			0	dBm
Receiver Elec. 3 dB cutoff freq.				1500	MHz
Optical Center Wavelength	λC	1265		1600	nm
Return Loss		12			dB
LOS De-Assert	LOSD		-23	-19	dBm
LOS Assert	LOSA	-30	-25		dBm
LOS Hysteresis		0.5			dB

Notes:

1. Class 1 Laser Safety per FDA/CDRH and EN (IEC) 60825 regulations.

2. Also specified to meet curves in FC-PI 13.0 Figures 18 and 19, which allow trade-off between

wavelength, spectral width and OMA.

3. Equivalent extinction ratio specification for Fiber Channel. Allows smaller ER at higher average power.

4. Unfiltered, 20-80%. Complies with IEEE 802.3 (Gig. E), FC 1x and 2x eye masks when filtered.

5. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and DDJ.

6. Measured with conformance signals defined in FC-PI 13.0 specifications.

7. Measured with PRBS 27-1 at 10-12 BER

Order information

Product Model	Descriptions
BDTRP439L1SN-10	1000Base-LX, 1.25G, LC connector, WDM, Wavelength: transmitter 1310nm/receiver 1490nm, 10km.
BDTRP493L1SN-10	1000Base-LX,1.25G, LC connector, WDM, Wavelength: transmitter 1490nm/receiver 1310nm, 10km.
BDTRP439L1SN-20	1000Base-LX, 1.25G, LC connector, WDM,Wavelength: transmitter 1310nm/receiver 1490nm, 20km.
BDTRP493L1SN-20	1000Base-LX, 1.25G, LC connector, WDM, wavelength: transmitter 1490nm/receiver 1310nm, 20km.

Q&A

Question1: Is SFP module compatible with Zyxel, 3Com, Cisco and Huawei?
Answer: No, SFP module is compatible with Zyxel, 3Com and Cisco. For Huawei, it can only be compatible with the old models, because some new devices (such as S6800 series) requires special compatibility code.

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Country

Province

Zip code

Recover password

Create my account

SFP Module fiber Optical Transceiver 1.25G

Description

Specification

Order information

Q&A

Payment & Security

Estimate shipping

You may also like

Recently viewed