Functions
1~64 POTS (FXO/FXS) over Fiber multiplexer is a kind of point-to-point fiber transmission device. BAUDCOM designed 1~64POTS (FXO/FXS), 1~4channel G.703 E1 and 1~4 channel 100M Ethernet，1~4 channelRS232 transmit over one fiber, and it could match different customer requirement.
|
PRODUCT CHARACTERISTIC
|
- provides 1~4 channel E1/ G.703 for option;
- provides 1~4 channel 100M (liner) Ethernet ports for option;
- provides 1~64channel POTS( FXO/ FXS),also can offer 2/4 wire E&M for option;
- provides 1~4 channel RS232, rate supports 300-15200 bps for option;
- Ethernet port 10/100M, full/half duplex auto-adaptable and supports VLAN;
- Ethernet port supports AUTO-MDIX (twisted cable and straight cable auto-adaptable);
- 1~30 channel voice connection, supports calling indication;
- Configuration: point to point;
- Voice port supports O port and S port, O port connects switch and S port connects user’s phone;
- Optical interface supports SC/FC interface and supports single fiber interface
- 1+1 optical for protection
|
|
FXO port
|
|
Alarm voltage
|
75V
|
|
Alarm frequency
|
25HZ
|
|
2 line input impedance
|
600Ω (hanging off)
|
|
Wastage
|
40db
|
|
FXS port
|
|
Alarm detecting voltage
|
35V
|
|
Alarm detecting frequency
|
17HZ-60HZ
|
|
2 line input impedance
|
600Ω (hanging off)
|
|
E&M port
|
|
E wire
|
M wire
|
|
Max current： 22mA
|
steady current： 7 mA
|
|
Saturation voltage: 3V
|
min test current： 5 mA
|
|
Dial speed：
|
Pluse dial recognition>20pps
|
|
10/100BaseT Interface
|
|
Number of Interfaces
|
1~4 port
|
|
Interface Types
|
10/100BaseT
|
|
Standards Compliance
|
IEEE 802.3
|
|
Protocol
|
User Programmable HDLC
|
|
Connectors
|
B RJ45 (10/100 BaseT Electrical)
|
|
E1 Interface
|
|
Number of Interfaces
|
4 port
|
|
Line Rate
|
E1 (2.048Mbps ± 50 bps)
|
|
Line Code
|
HDB3
|
|
Electrical
|
ITU-T G.703
|
|
Jitter
|
G.823
|
|
Impedance
|
75hom/120 Ohms
|
|
Connectors
|
BNC(75ohm) or RJ45(120ohm)
|
|
Vibration Characteristic
|
Satisfies G.742 and G.823 standard
|
|
RS232 interface
|
|
rate
|
30~115.2kbps auto adaptable (Asychronous)
|
|
Connector
|
RJ45
|
|
Interface Characteristic
|
Satisfies ITU-T V.24 standard
|
|
Optical Interface
|
|
Optical interface
|
SC/FC/ST
|
|
Wavelength
|
1310nm/1550nm for single-mode optic interface for option
850nm/1310nm for multi-mode optic interface for option
|
|
Sending consumption:
|
-9dBm (regular order)
|
|
Receiving and dispatching module:
|
>-36dBm(regular order)
|
|
Optical receiver receiving sensitivity:
|
<-36 (BER<10):
|
|
Optical code:
|
NRZ
|
|
Transmit distance
|
MM 2Km/5Km,SM 20Km/40Km/60 Km/120Km for option
|
|
Mechanical Specifications
|
|
Rack Mounting
|
Standard 19-inch DIN rack
|
|
Dimension
|
19inch 1 U: 433mm(L)*138mm(D)*44mm(H)
|
|
Management for option
|
|
Web managed built-in or SNMP central management via chassis
|
|
Power Supply
|
|
Input AC/DC voltage
|
-48V DC ( nominal ) / AC also available
|
|
Range of input
|
-36V to -72V DC /90V~260VAC
|
|
Temperature
|
0 centi degree to 55 centi degree
|
|
Humidity
|
95% RH (non-condensing)
|
|
Cooling
|
Convection Cooling
|
|
Order information
|
|
BD-OP-MUX64
|
64POTS(FXO/FXS) over Fiber multiplexer
|
|
BD-OP-MUX64/4E1
|
64POTS(FXO/FXS) ,4E1 over Fiber multiplexer
|
|
BD-OP-MUX64/4E1/4ETH
|
64POTS(FXO/FXS) ,4E1 ,4Ethernet over Fiber multiplexer
|
