1.This xpon onu router is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access .
2. This onu is based on mature and stable, cost-effective XPON technology. The onu gpon/epon mode could switch automatically when access to the EPON OLT and GPON OLT.
3.This 4GE 1POTS 2WIFI XPON onu adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984. The XPON onu wifi function in strong signal and high transfer speed. Support dual band in 2.4G and 5G.
Specification of 1ge 1pots dual band wifi onu
Technical item |
Details |
PON Interface |
1 GPON BoB(Bosa on Board) |
Receiving sensitivity: ≤-27dBm |
Transmitting optical power: +1~+4dBm |
Transmission distance: 20KM |
Wavelength |
TX: 1310nm, RX: 1490nm |
Optical Interface |
SC/APC Connector |
Design Scheme |
RTL9607C+RTL8192FR(2.4G)+RTL8812ER(5G)+Si32192 BOB(RTL8290B) |
RAM |
2Gbit DDR3 |
Flash |
1Gbit SPI NAND Flash |
LAN Interface |
4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 |
connector |
Wireless |
Compliant with IEEE802.11b/g/n,ac |
2.4G Operating frequency:2.400-2.4835GHz |
5.8G Operating frequency:5.150-5.825GHz |
2.4G 2*2 MIMO, rate up to 300Mbps |
5.8G 2*2 MIMO ,rate up to 867Mbps |
4 external antennas 5dBi |
Support Multiple SSID |
FXS, RJ11 connector |
POTS interface |
Support: G.711/G.723/G.726/G.729 codec |
Support: T.30/T.38/G.711 Fax mode, DTMF Relay |
Line testing according to GR-909 |
USB |
Standard USB2.0 |
LED |
11 LED, For Status of PWR、LOS、PON、LAN1~LAN4、2.4G、5.8G Worn |
Push-Button |
2 ,For Function of Reset and WPS |
Operating Condition |
Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) |
Storing Condition |
Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) |
Power Supply |
DC 12V/1A |
Power Consumption |
≤6W |
Dimension |
260mm×158mm×192mm(L×W×H) |
Net Weight |
0.35Kg |
Storing Condition |
Temperature: -30℃~+60℃ |
Panel lights Introduction
Pilot Lamp |
Status |
Description |
PWR |
On |
The device is powered up. |
Off |
The device is powered down. |
LOS |
Blink |
The device doses not receive optical signals or with low signals. |
Off |
The device has received optical signal. |
PON |
On |
The device has registered to the PON system. |
Blink |
The device is registering the PON system. |
Off |
The device registration is incorrect. |
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
Blink |
Port (LANx) is sending or/and receiving data (ACT). |
Off |
Port (LANx) connection exception or not connected. |
2.4G |
On |
2.4G WIFI interface up |
Blink |
2.4G WIFI is sending or/and receiving data (ACT). |
Off |
2.4G WIFI interface down |
5.8G |
On |
5G WIFI interface up |
Blink |
5G WIFI is sending or/and receiving data (ACT). |
Off |
5G WIFI interface down |
Application of this XPON ONU
Typical Solution:FTTH(Fiber To The Home)
Typical Business:INTERNET、IPTV、WIFI 、VOIP etc
Order Information
BD-ONU-214HW-AC |
4G+1POTs+USB+wifi dual band (2.4G&5G), XPON ONU, power AC220V |