Description
The 1550nm optical amplifier EDFA is high output power C-Band Er-Yb co-doped double cladding fiber optic amplifier. The key components of the product are high reliability multimode PUMP laser and the double cladding optical fiber. A proprietary ATC (Automatic Temperature Control) and APC (Automatic Power Control) circuit insures the high stability and reliability output power, the unique optical circuit design ensures the excellent optical performance. The high stability and high precision MPU system to ensure the control, adjustment and display are intelligent and easy.
The EDFA employs double cladding Erbium Ytterbium co-doped fiber, and employ the high power multimode pump, with a 10 times Conversion efficiency higher than the single mode general technology, and therefore have a lower relative cost and more compact size and lower power consumption, in particular, for FTTH or FTTB or other large distribution system applications.
The 1550 CATV EDFA employs intelligent temperature control system: (1)Adopt special temperature control circuit, heat radiating and power consumption can be reduced 30%, (2)The professional air flow design can also ensure the best temperature stability, at the same time powerful fan will start when the case temperature is over 45℃, meanwhile it will stop as the temperature is under 40℃. The technology makes sure the thermal stability of system and fan’s long life.
Intelligent network management system. Perfectly network interface: Ethernet network, and the open network management interface ensure the connectivity with all other network management system.
The EDFA is widely used in CATV transmission system and the high power distributing system FTTH requirement. It can be used for CATV analog/digital signal distribution, or match with PON system to construction the triple network integration. (Triple wavelength WDM is optional)
1550nm optical amplifier EDFA's Application
◆Analog CATV Transmission
◆FTTH Optical Access
◆Optical Distribution
◆Free Space Optical
◆R&D and Training
1550 CATV EDFA's Feature
◆High Power: Up to 2W total, 1 Unit for 2000~4000 optical node
◆Low Noise Figure: Below 5.5dB ( +5dBm input)
◆Er Yb co-doped DCF Amplify Technology: Patent Pump Dump Technology
◆Low CSO: <-70dBc
◆23dBm×N, 20dBm×N or 17dBm×N output is optional
◆Controllability and maneuverability: Dual CPU to deal Control loop and Communication separately
◆High Stability And Reliability: MTTF>150000 Hours
◆Redundancy Hot Swap power module: 110/220VAC and 48VDC can plug Mix
◆Perfect Network Interface: Ethernet
◆ 64 ports EDFA supports SNMP network management
◆Intelligent Temperature Control System: using a dedicated Temperature control chip which make cooling and power loss reduce 30% than competitors
◆Output Power can be Adjustable by network and manual
◆Integrated 1310nm, 1490nm, 1550nm WDM (Optional)
◆OEM, Module is available
1550nm Optical Amplifier EDFA's Block Diagram
1550 CATV EDFA's Optical Characteristics
Parameter
|
Symbol
|
MIN
|
TYP
|
MAX
|
UNITS
|
Operating Wavelength
|
λc
|
1540
|
1550
|
1565
|
nm
|
Saturated Output Power Note1
|
Po
|
13
|
------
|
33
|
dBm
|
Input Power
|
Pi
|
-3
|
------
|
+10
|
dBm
|
Gain
|
G
|
------
|
------
|
30
|
dB
|
Noise Figure Note2
|
NF
|
------
|
------
|
5.5
|
dB
|
Output Power Stability
|
ΔPo
|
-----
|
±0.05
|
±0.2
|
dB
|
Input Isolator
|
ISOi
|
30
|
-------
|
------
|
dB
|
Output Isolator
|
ISOo
|
30
|
-------
|
------
|
dB
|
Input Pump Leakage
|
PLi
|
-------
|
-------
|
-35
|
dBm
|
Output Pump Leakage
|
PLo
|
-------
|
-------
|
-45
|
dBm
|
Return Loss
|
RL
|
-------
|
-------
|
-45
|
dB
|
Polarization Dependent Gain
|
PDG
|
------
|
-------
|
0.3
|
dB
|
Polarization Mode Dispersion
|
PMD
|
------
|
-------
|
0.5
|
ps
|
Note 1:Optional
Note 2:Tested at +5dBm Input
Environmental characteristics
Parameter
|
Symbol
|
MIN
|
TYP
|
MAX
|
UNITS
|
Operating Temperature
|
Tw
|
-5
|
-----
|
60
|
℃
|
Storage Temperature
|
Ts
|
-40
|
-----
|
80
|
℃
|
Humidity Note
|
------
|
10
|
------
|
90
|
%
|
Note: No Condensate
1550nm optical amplifier EDFA's Electrical Characteristics
Parameter
|
Symbol
|
MIN
|
TYP
|
MAX
|
UNITS
|
Power Supply(1)
|
Vps
|
170
|
|
264
|
VAC
|
Power consumption
|
P
|
-----
|
-----
|
50
|
W
|
1: 110VAC,220VAC and -48VDC is optional, and duplicate supply is optional.
Front-Panel, Back-Panel
Order information
Product Model |
Descriptions |
BD-EDFA-3564 |
64ports fiber amplifier, built-in WDM, for PON application, dual power |