Description
BD-2EOC-OR-ONU is an all-in-one EOC Master with EOC master module, ONU module and OR module.
We can use one BD-2EOC-OR-ONU to instead of three type products, HFC optical node, EPON ONU and EOC mater. It can reduce the number of active node in the system, decreasing failure rate and saving a space. It is the best choice of CATV, Internet and VOD for the operator.
The EOC Master Module in the BD-2EOC-OR-ONU is based the Qualcomm AR7410 chipset solution，with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The EOC Master can provide high speed data service. The PHY Layer speed is 600Mbps, the MAC Layer throughput is up to 320Mpbs.
The OR module in the BD-2EOC-OR-ONU can provide an HFC optical input and one RF output. The CATV signal will convert from optical to RF signal here. The OR module is a high quality optical receiver product. It received the optical signal from the TX of HFC network, and the signal processed by the PIN, Amplifier, EQ and AGC to a stable RF output. The output level will be up to 108dBuv.
The ONU module in the BD-2EOC-OR-ONU designed with one EPON port, two standard 10/100/1000 Base-TX Ethernet ports. It provides the key functionality of 802.3ah EPON ONU. By using the EPON technology, the ONU module provides a high-speed data channel through a single optical fiber with a rate of 1.25 Gbit/s on bi-direction. In addition, it offers the QOS, flexible bandwidth allocated to provide quality high-speed data service, voice service, and video service.
Function Features
n High integration with two EOC Master modules, one ONU module and one OR module
n Aluminum alloy die casting shaping, good heat dissipation
n Outdoor waterproof designed, 60V/220V power supply optional
n 7.5-65Mhz frequency for EOC signals., no influence on CATV Service
n Support data encryption
n Support broadcast storm limitation
n Support data packet statistics
n Support auto-update and auto-configuration
n Support the optical power monitor
n Flexible bandwidth allocation function
n Support various QOS service level
n EMS network management based on SNMP
n Provide a rich fault alarm function, easy to fault diagnosis
n Support software online upgrade
n OR support AGC
n CATV RF output up to 108dBuv
n ONU module compliant with IEEE802.3ah and CTC2.1standards.
n ONU module provides tow auto-negotiation GE ports
n ONU module support interconnection with the third-party OLT
n Support the EMS network based on SNMP
Specification
Specification
|
Item |
Parameters |
Specification |
|
Specification of EOC Module |
||
|
Interface and LED Indicator |
RF Port |
One TV (CATV Signal) Output, metric F-FemaleOne CABLE (Mixed Signal) Input, metric F-Female |
|
Ethernet Port |
Two 10/100/1000Mauto-negotiation, RJ45 | |
|
LED Indicator |
1 for Power Supply Status1 CABLE Link Status indicator2 for Ethernet Ports Status | |
|
Performance Parameters |
RF Parameters |
Frequency Band :7.5-65MHz
RF Output Level:110±5dBuv@ output of module Receive sensitivity: 45dBuv Return Loss:>16dB Output Resistance:75Ω |
|
Transmission |
PHY Layer:600MbpsThroughput on MAC Layer:320Mbps | |
|
Modulation Mode |
OFDM~ 2690~carriers 4096,1024,256,64,16,8~QAM, QPSK, BPSK, ROBO | |
|
Working Mode |
TDMA/CSMA | |
|
Encryption Mode |
AES-128 | |
|
Standard |
EOC Standard |
IEEE P1901(Draft)HomePlug AV |
|
Ethernet Standard |
IEEE 802.3, IEEE 802.3x, IEEE 802.3uIEEE802.1P, IEEE802.1Q | |
|
Software |
Network Management |
WEB, CLI, SNMP |
|
Software Features |
VLAN, QOS, Bandwidth Control, Broadcast storm limitation | |
|
Specification of OR |
||
|
Optical Specifications |
Wavelength |
1100～1600 nm |
|
Optical Power Input Range |
-8～+2 dBm | |
|
Recommend optical Power Input Range |
-6～0 dBm | |
|
Optical Input Return Loss |
≥45 dB | |
|
RF Specifications |
Bandwidth |
45～870 MHz |
|
Flatness |
≤±0.75 dB |
|
|
Stability of RF output under Operating Temperature |
≤5 dB |
|
|
Nominal RF Output Level |
108 dBuV |
|
|
Impedance |
75 Ohm |
|
|
Return Loss |
≥14 dB |
|
|
CNR |
≥51 dB |
|
|
CSO |
≥60 dBc |
|
|
CTB |
≥65 dBc |
|
|
Power consumption |
<7.5 W |
|
|
Optical and temperature AGC |
Stability of RF output under optical AGC |
≤±1 dB |
|
AGC Scope |
-6～0dBm |
|
|
LED Indicator |
Indicator Description |
RUN: module operatingRF: RF signalPWR：Power is coming upOPTH: Optical power is higherOPTM: Optical power is nominal
OPTL: Optical power is lower |
|
Specification of ONU Module |
||
|
Interface |
PON Interface |
One EPON portMeet 1000BASE-PX20 standardUp to 1.25Gbps Upstream and Down-streamSC ConnectorSingle-mode fiber, single-strand
Maximum split ratio 1:64 Up to 20Km distance @ 1:32 |
|
Ethernet Interface |
Two 10/100/1000Mauto-negotiationFull/Half-DuplexRJ45 type connector , Auto MDI/MDI-XUp to 100m distance | |
|
Performance Parameters |
PON Optical Parameters |
Wavelength: Upsteam1310nm, Downstream 1490nmTransmitter Optical Power: -1～4dBmOptical Receive Sensitivity: -27dBmSaturation Optical Power：-3dBm |
|
Data Transfer Parameters |
Data Transfer Rate: Upstream 900Mbps；Downstream 950MbpsLAN Interface: 1000MbpsPacket Loss：<1*10E-12latency：<1.5ms | |
|
Business Capability |
Layer 2 wire speed switchingSupport VLAN TAG/UNTAG，VLANconversionSupport Port-based speed limitationSupport Priority classificationSupport storm control of broadcast | |
|
Network Management |
Management Mode |
Support IEEE802.3 QAM, ONU can be remotely managed by OLTSupport Remote management through SNMP and TelnetLocal management |
|
Function |
Status monitor, Configuration management, Alarm management, Log management |
|
|
Indicator |
Indicator Description |
PWR: Power up or downLOS: Optical Link StatusPON：ONU registeredLNK: Link Status |
|
Physical Features |
||
|
Physical Features |
Power supply & Consumption |
Power Supply：220V/60V optionalConsumption：<24.5W |
|
Size & Net weight |
Dimension：290×220×120mmWeight：3.7kg | |
|
Environment Attribute |
Working Temperature：－10～65℃Storage Temperature：-40～85℃Working humidity：10%～90%non-condensingStorage humidity：10%～90% non-condensing | |
Typical Application
CATV
Internet Access
VOD
IPTV
Camera monitor system
Application
Figure 1 BD-2EOC-OR-ONU Application Illustration
Order information
| Product Model | Descriptions |
|---|---|
| BD-4EOC-OR-ONU /220VAC | EOC Master+OR+ONU, outdoor, 2pcs EOC Master modules, 1channel TV input,2channels TV+data mixed output ports, 1pcs EPON ONU, 1pcs OR, with WDM, AC 220V |
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.