The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.
Features
Support for multi-gigabit data rates up to 10.5Gbps
1m、3m、5m Reach
Data rates backward compatible to 1Gbps
Hot-pluggable SFP 20PIN footprint
I/O Connector designed for high speed differential signal applications
Improved Pluggable Form Factor(IPF) compliant for enhanced EMI/EMC performance
Compatible to SFP+ MSA
Temperature Range: 0~ 70 °C
RoHS Compatible
Specification
Recommended Operating Conditions
|
Parameter
|
Symbol
|
Min
|
Typical
|
Max |
Unit
|
| Storage Ambient Temperature |
|
-40
|
|
+85
|
°C
|
| Operating Case Temperature |
Tc
|
0
|
|
+70
|
°C
|
Systems
|
Performance
|
Media
|
| 10.5 Gpbs line speed, full duplexBit error rate: better than 10E-12 |
Hot-pluggable, industry-standard Small Form-Factor
Pluggable(SFP+) copper cable, available as 1m,3m or 5m.
|
Pin Descriptions
|
Pin
|
Logic
|
Symbol
|
Name/Description
|
Notes |
|
1
|
|
VeeT
|
Transmitter Ground
|
|
|
2
|
LV-TTL-O
|
TX_Fault
|
N/A
|
1
|
|
3
|
LV-TTL-I
|
TX_DIS
|
Transmitter Disable
|
2
|
|
4
|
LV-TTL-I/O
|
SDA
|
Tow Wire Serial Data
|
|
|
5
|
LV-TTL-I
|
SCL
|
Tow Wire Serial Clock
|
|
|
6
|
|
MOD_DEF0
|
Module present, connect to VeeT
|
|
|
7
|
LV-TTL-I
|
RS0
|
N/A
|
1
|
|
8
|
LV-TTL-O
|
LOS
|
LOS of Signal
|
2
|
|
9
|
LV-TTL-I
|
RS1
|
N/A
|
1
|
|
10
|
|
VeeR
|
Reciever Ground
|
|
|
11
|
|
VeeR
|
Reciever Ground
|
|
|
12
|
CML-O
|
RD-
|
Reciever Data Inverted
|
|
|
13
|
CML-O
|
RD+
|
Reciever Data Non-Inverted
|
|
|
14
|
|
VeeR
|
Reciever Ground
|
|
|
15
|
|
VccR
|
Reciever Supply 3.3V
|
|
|
16
|
|
VccT
|
Transmitter Supply 3.3V
|
|
|
17
|
|
VeeT
|
Transmitter Ground
|
|
|
18
|
CML-I
|
TD+
|
Transmitter Data Non-Inverted
|
|
|
19
|
CML_I
|
TD-
|
Transmitter Data Inverted
|
|
|
20
|
|
VeeT
|
Transmitter Ground
|
|
1. Signals not supported in SFP+ Copper pulled-down to VeeT with 30K ohms resistor
2. Passive cable assemblies do not support LOS and TX_DIS
Applications
- High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
- Switched fabric I/O such as ultra high bandwidth switches and routers
- Data center cabling infrastructureHigh density connections between networking equipment
Order information
| Product Model |
Descriptions |
| BD-10GSFP-Cable-3001C |
SFP+ Direct Attach Passive Cable (10GSFP+Cu), 1m, AWG:30, 0ºC ~ +70ºC |
| BD-10GSFP-Cable-2603C |
SFP+ Direct Attach Passive Cable (10GSFP+Cu), 3m, AWG:26,0ºC ~ +70ºC |
| BD-10GSFP-Cable-2405C |
SFP+ Direct Attach Passive Cable (10GSFP+Cu), 5m, AWG:24,0ºC ~ +70ºC |
